New registrations are temporarily disabled due to a fault with our email system. We are working to resolve this.

QuickQ 20 - All lights flicker off & on


QuickQ 20 - All lights flicker off & on

Postby lukegendreau » Fri Aug 06, 2021 1:46 am

Recently we've been experiencing an issue where all of the lights in our auditorium will randomly flicker off for 1 second and immediately turn back on (house lights, faders, LEDs, etc.). We are using the QuickQ 20 for all lighting in the auditorium. This flickering happens without anyone touching the console and seems to occur randomly every few hours or so, regardless of whether we are in a cue stack or not. We do all of our lighting programming through the console and don't use any computer software as of right now.

We have tried multiple troubleshoots including shutting down the console, clearing and re-recording cues, taking our house lights out of the QuickQ 20 console and controlling them manually instead, etc. but nothing has prevented the flickering from reoccurring. It is quite distracting and unprofessional. If anyone has any insight, it would be greatly appreciated.
Posts: 2
Joined: Thu Oct 03, 2019 7:48 pm
Country: Canada

Re: QuickQ 20 - All lights flicker off & on

Postby » Fri Aug 06, 2021 8:52 am

In this case it is best to contact the installer to check the installation. There can be many reasons!
Site Admin
Posts: 7130
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Return to General

Who is online

Users browsing this forum: No registered users and 2 guests