New registrations are temporarily disabled due to a fault with our email system. We are working to resolve this.

Midicon controller and MagicQ

Moderator: ChamSys.be

Midicon controller and MagicQ

Postby skippy204 » Mon Nov 15, 2021 6:22 pm

It it possible to use a Midicon Pro controller with MagicQ Software?

https://www.elationlighting.com/midicon-pro
skippy204
 
Posts: 6
Joined: Mon May 02, 2016 5:37 am
Country: United States

Re: Midicon controller and MagicQ

Postby ChamSys.be » Tue Nov 16, 2021 9:36 am

For midi you need at least the MagicQ Rackmount dongle.
ChamSys.be
Site Admin
 
Posts: 7130
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: Midicon controller and MagicQ

Postby skippy204 » Tue Nov 16, 2021 7:44 pm

Thanks much.

Where can I find instructions about how to map functions to the buttons of the controller?
skippy204
 
Posts: 6
Joined: Mon May 02, 2016 5:37 am
Country: United States

Re: Midicon controller and MagicQ

Postby ChamSys.be » Tue Nov 16, 2021 7:58 pm

ChamSys.be
Site Admin
 
Posts: 7130
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: Midicon controller and MagicQ

Postby skippy204 » Tue Nov 16, 2021 8:18 pm

So this video says there is a limit on how many faders can be controlled.

So if I can only control the first 10 faders - does that means all my additional pages will do nothing?

Will the motorized faders on this console work as intended with MagicQ? In his demo he is working with non-motorized faders.

Thanks.
skippy204
 
Posts: 6
Joined: Mon May 02, 2016 5:37 am
Country: United States

Re: Midicon controller and MagicQ

Postby ChamSys.be » Wed Nov 17, 2021 8:43 am

So this video says there is a limit on how many faders can be controlled.

yes, max. 10 playback faders.

So if I can only control the first 10 faders - does that means all my additional pages will do nothing?
You can control the first 10 playback faders on each page. But each playback can be used max. 2x at he same time.

Will the motorized faders on this console work as intended with MagicQ? In his demo he is working with non-motorized faders.

NO, we don't control your Midi controller. You are sending onle midi commands to the MagicQ software.

Keep in mind: MagicQ software is free and sends 64 universes via ArtNet, sACN, Pathport. Developing a software costs a lot of money. So, it is normal that you can't use 3th party hardware to build your own console.
ChamSys.be
Site Admin
 
Posts: 7130
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium


Return to General

Who is online

Users browsing this forum: No registered users and 2 guests