New registrations are temporarily disabled due to a fault with our email system. We are working to resolve this.

Need a help

Moderator: ChamSys.be

Need a help

Postby MaxP » Thu Sep 19, 2019 9:29 pm

Hi

I planing to buy a MQ80 but i want to know if there soon comming any new consoles to replace the MQ80 before i buy any console.

Thanks.
MaxP
 
Posts: 1
Joined: Thu Sep 19, 2019 9:17 pm

Re: Need a help

Postby ChamSys.be » Fri Sep 20, 2019 9:03 am

There is no replacement planned for the MQ80. The MQ70 is new, but has lower specs then MQ80.
For this reason, MQ80 has now 48universes as standard and supports RDM via the DMX ports.
ChamSys.be
Site Admin
 
Posts: 7125
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: Need a help (RDM SNAKESYS)

Postby voodoodan » Tue Sep 24, 2019 8:19 pm

28.1/ page 263 of the manual for 1.8.3.1 says...

"Currently no ChamSys consoles, USB devices or network nodes support RDM; you need a 3rd party RDM network node which supports RDM over Art-Net, and a minimum MagicQ version of 1.7.9.4."

Your comment regarding the MQ80 is obviously different from the manual...

ChamSys.be wrote:For this reason, MQ80 has now 48universes as standard and supports RDM via the DMX ports.


My question is this- will MagicQ PC see RDM units from a B4 Snakesys? Or is the manual still semi-correct in that regard?
voodoodan
 
Posts: 1
Joined: Sat Apr 23, 2011 9:42 am
Country: United Kingdom

Re: Need a help

Postby ChamSys.be » Tue Sep 24, 2019 8:23 pm

Manual is still correct. Except for the MQ80. MQ80 supports now RDM!
ChamSys.be
Site Admin
 
Posts: 7125
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium


Return to General

Who is online

Users browsing this forum: No registered users and 1 guest