New registrations are temporarily disabled due to a fault with our email system. We are working to resolve this.

Semi Circular truss

Connection between MagicQ and Visualisers as Capture 2005, Wysiwyg,....

Moderator: ChamSys.be

Semi Circular truss

Postby M_jebi88 » Sun May 14, 2017 3:13 pm

Hi.

Couldn't find a thread in regards to this. but sorry if the question has been asked.
I'm designing a show and want to use half of a circle truss mounted on stage. Is there a way to insert part of a curved truss into the visualiser without having to have a full circle. Mainly to make it easy to attatch heads. I've added a picture that will hopefully clarify what I am asking.

Cheers
Attachments
Show Design.jpg
Show Design.jpg (192.81 KiB) Viewed 3041 times
M_jebi88
 
Posts: 3
Joined: Sun May 14, 2017 9:40 am
Country: Australia

Re: Semi Circular truss

Postby ChamSys.be » Mon May 15, 2017 7:44 am

Yes tthis is possible:
- insert the truss
- change type to circle truss
- set the wanted diameter
- go to the right and in column Param 1 you set the number of degrees, for example 180
- now you have a halve circle
ChamSys.be
Site Admin
 
Posts: 7125
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: Semi Circular truss

Postby MYGRANE » Thu Jul 26, 2018 5:31 pm

Please help. When trying to make the half circle truss, I don't see the " column Param 1", so that I can change the 360 degrees to 180.

I'm on a PC, not a console.

Thanks for the help.
MYGRANE
 
Posts: 2
Joined: Thu Jul 26, 2018 5:25 pm
Country: United States

Re: Semi Circular truss

Postby ChamSys.be » Thu Jul 26, 2018 5:35 pm

Scroll in the window to the right till you see the column.
ChamSys.be
Site Admin
 
Posts: 7125
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: Semi Circular truss

Postby MYGRANE » Thu Jul 26, 2018 5:49 pm

Thanks so much...I didn't even know there was more to the right.
MYGRANE
 
Posts: 2
Joined: Thu Jul 26, 2018 5:25 pm
Country: United States


Return to MagicQ & Visualisers

Who is online

Users browsing this forum: No registered users and 1 guest