New registrations are temporarily disabled due to a fault with our email system. We are working to resolve this.

Identify channels on unbranded LED batten

Request for new heads and problems with existing heads. Please goto the bugtracker to place your requests: http://download.magicq.co.uk

Moderator: ChamSys.be

Re: Identify channels on unbranded LED batten

Postby Snuffy » Thu Aug 09, 2018 3:23 pm

Set up again today, plugged everything back in, reloaded the last show, and the physical batten started responding :lol: Which I'm not complaining about, but it doesn't really help me with understanding more about it.

I was reading about the Out Type within the DMX I/O window. It's currently set to Art-Net, is that correct for a 5pin straight out of the Wing and into some fixtures?
Snuffy
 
Posts: 14
Joined: Thu Jul 26, 2018 6:17 pm
Country: United Kingdom

Re: Identify channels on unbranded LED batten

Postby ChamSys.be » Thu Aug 09, 2018 3:25 pm

Yes, this is correct!
ChamSys.be
Site Admin
 
Posts: 7126
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: Identify channels on unbranded LED batten

Postby Snuffy » Thu Aug 09, 2018 4:04 pm

Winner.

I'm far from sorted, but I have a couple of battens hooked up, different chases running on each, control over them from the wing, so, happy days!

Again, thanks for all the help, it really is appreciated.
Snuffy
 
Posts: 14
Joined: Thu Jul 26, 2018 6:17 pm
Country: United Kingdom

Re: Identify channels on unbranded LED batten

Postby Snuffy » Thu Aug 09, 2018 4:55 pm

Bit of back pedalling here...

When I'm on the intensity page and just using the dimmers to control individual channels, can I set the dimmers / faders on the physical MiniWing to control those channels? At present, they don't do anything, I don't get anything from them. I'm guessing they would have to be assigned in some way? Again, I appreciate this might not be possible?

cheers
Snuffers
Snuffy
 
Posts: 14
Joined: Thu Jul 26, 2018 6:17 pm
Country: United Kingdom

Re: Identify channels on unbranded LED batten

Postby ChamSys.be » Thu Aug 09, 2018 5:05 pm

I think it is best that you read the Quick Start manual at least. Then you will see that the 10 faders are playbacks that needs to be programmed.
They will standard not take control as in the intensity Window.
ChamSys.be
Site Admin
 
Posts: 7126
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: Identify channels on unbranded LED batten

Postby Snuffy » Thu Aug 09, 2018 5:21 pm

Gotcha. Cheers.
Snuffy
 
Posts: 14
Joined: Thu Jul 26, 2018 6:17 pm
Country: United Kingdom

Previous

Return to Personality files

Who is online

Users browsing this forum: No registered users and 1 guest

cron