New registrations are temporarily disabled due to a fault with our email system. We are working to resolve this.

MINIWING no OUT DMX Values

Hardware related questions about Mini Wing, PC Wing & Maxi Wing.

Moderator: ChamSys.be

MINIWING no OUT DMX Values

Postby salvonos » Tue Apr 30, 2019 12:28 pm

Mini Wing Problem.
I am new with MaqicQ on Mac and I have a strange problem.
I have my media server patched and when I open the magicQ without wing everything works fine, with fader 1 I can control Layer 1, fader 2 layer 2 and so on..
The problem is if I start the magicQ with the MiniWing connected I can control the faders but I don't have any DMX change. If I look at OUT -> VIEW CHANS the value when I move the fader is always 0%. If I test the universe with a ramp the media server is responding fine.

Also in order for my MiniWing to be detected I had to switch "MagicQ Wings and Interfaces" to "FTDI drivers, auto DMX".

What could be the problem that when the miniWing is connected the dmx values assigned don't stays to 0%?
salvonos
 
Posts: 2
Joined: Tue Apr 30, 2019 12:26 pm
Country: United Kingdom

Re: MINIWING no OUT DMX Values

Postby ChamSys.be » Tue Apr 30, 2019 12:51 pm

Try this: MagicQ Wings and Interfaces" to "FTDI +VCP, auto DMX".
ChamSys.be
Site Admin
 
Posts: 7126
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: MINIWING no OUT DMX Values

Postby salvonos » Tue Apr 30, 2019 1:51 pm

Thanks I have tried, same issue. When wing is connected the dmx values are always 0
salvonos
 
Posts: 2
Joined: Tue Apr 30, 2019 12:26 pm
Country: United Kingdom

Re: MINIWING no OUT DMX Values

Postby ChamSys.be » Tue Apr 30, 2019 5:01 pm

Sure that the master is at 100%?
ChamSys.be
Site Admin
 
Posts: 7126
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium


Return to PC Wings

Who is online

Users browsing this forum: No registered users and 1 guest