New registrations are temporarily disabled due to a fault with our email system. We are working to resolve this.

mQ80 and touch screen pc

Everything about MQ50, MQ100, MQ200 & MQ300.

Moderator: ChamSys.be

mQ80 and touch screen pc

Postby ahmet » Sat Nov 10, 2018 11:35 am

Hello,
- I have mQ80 and "hp all in one pc".
- I am wondering, is there a way to use it as a touch monitor. Like a second screen.
- I was able to control in remote mode. But two screens were same.

Regards.
ahmet
 
Posts: 6
Joined: Mon Sep 03, 2018 8:31 am
Country: Turkey

Re: mQ80 and touch screen pc

Postby ChamSys.be » Sat Nov 10, 2018 11:57 am

Yes, you can.
- on the MQ80, Setup - View System - View Monitors configure the Net1 monitor
- On the PC start MagicQ Multi Window client (is installed with MagicQ)

This will work the same way as a touch monitor conected directly to the console.
ChamSys.be
Site Admin
 
Posts: 7126
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: mQ80 and touch screen pc

Postby ambren » Wed Jan 30, 2019 7:43 am

MagicQ consoles support many different touch protocols - however we are reliant on the drivers available in Linux, so not all touch screens will be supported. We strongly recommend you check the protocol is supported and test a sample with a MagicQ console before purchasing a touch screen. We can not guarantee that any touch screen will work with MagicQ - the list below is for guidance only
ambren
 
Posts: 1
Joined: Tue Jan 29, 2019 11:23 am
Country: United Kingdom


Return to MagicQ consoles

Who is online

Users browsing this forum: No registered users and 3 guests