New registrations are temporarily disabled due to a fault with our email system. We are working to resolve this.

Global rate master & Busking rate master

Request for adding new features to the software. Please goto the bugtracker to place your requests and bugs: http://download.magicq.co.uk

Moderator: ChamSys.be

Global rate master & Busking rate master

Postby muvment » Fri May 20, 2011 1:45 pm

It would be very handy to be able to assign both the global rate master and the busking rate master to [separate] faders for simultaneous use.

Perhaps allow one of them to be assigned to fader #10 for use on the PC Wing and to sub master for the Maxi wing.

Also, being able to change settings in a macro would allow for quick changes between the 2 until this feature is implemented.

Thanks!
muvment
 
Posts: 33
Joined: Thu May 07, 2009 11:47 pm
Country: United Kingdom

Re: Global rate master & Busking rate master

Postby ChamSys.be » Sat May 21, 2011 7:35 am

These 2 are also available in the playback windowon encoder X and Y !
ChamSys.be
Site Admin
 
Posts: 7072
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: Global rate master & Busking rate master

Postby muvment » Mon May 23, 2011 4:31 am

It looks like I have the Global Rate & Playback rate on the X & Y encoders. Do I need to change a setting to get Busking onto one of the encoders?

It would still be great to have both of them on faders, if possible.

thanks
muvment
 
Posts: 33
Joined: Thu May 07, 2009 11:47 pm
Country: United Kingdom

Re: Global rate master & Busking rate master

Postby ChamSys.be » Mon May 23, 2011 8:16 am

You just have to unlock the encoders by pushing the soft button next to it.
ChamSys.be
Site Admin
 
Posts: 7072
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: Global rate master & Busking rate master

Postby muvment » Wed May 25, 2011 7:17 pm

It was pretty clear to unlock the encoders. But there is no busking rate master on the encoder (however, I can apply it to the fader). The problem being, if I have the busking rate on the crossfade master, I would have to click the playback page every time I wanted to adjust the Global rate, which is a bit cumbersome.
muvment
 
Posts: 33
Joined: Thu May 07, 2009 11:47 pm
Country: United Kingdom

Re: Global rate master & Busking rate master

Postby Element » Fri Jun 17, 2011 2:56 pm

Is there any way to get this added to the next release?

The global rate master, when used by the crossfader, has a huge range, and is easily accessible during a show. The soft button/fader control is only 0-100 and is hard to adjust in the middle of a show.

Is there any way to allow the option of assigning the busking rate master to the Submaster slider on the Maxi Wing, or possibly playback #10?

Having tactile access to both of these rates during the run of our type of shows (festivals and such) would be invaluable.
Element
 
Posts: 2
Joined: Thu Jul 01, 2010 9:31 pm
Country: United Kingdom

Re: Global rate master & Busking rate master

Postby ChamSys.be » Fri Jun 17, 2011 3:25 pm

New feature requests, you best report on the official Bug Tracker:
http://download.magicq.co.uk
ChamSys.be
Site Admin
 
Posts: 7072
Joined: Mon Jul 23, 2007 2:06 pm
Location: Lebbeke
Country: Belgium

Re: Global rate master & Busking rate master

Postby Element » Sat Jun 18, 2011 4:07 am

Already done it there. No response. I also emailed Esteban here in the USA.

Hopefully we'll see that option someday soon. It would really help busk a show!
Element
 
Posts: 2
Joined: Thu Jul 01, 2010 9:31 pm
Country: United Kingdom


Return to New features requests

Who is online

Users browsing this forum: No registered users and 1 guest

cron