Page 1 of 1

Global rate master & Busking rate master

PostPosted: Fri May 20, 2011 1:45 pm
by muvment
It would be very handy to be able to assign both the global rate master and the busking rate master to [separate] faders for simultaneous use.

Perhaps allow one of them to be assigned to fader #10 for use on the PC Wing and to sub master for the Maxi wing.

Also, being able to change settings in a macro would allow for quick changes between the 2 until this feature is implemented.

Thanks!

Re: Global rate master & Busking rate master

PostPosted: Sat May 21, 2011 7:35 am
by ChamSys.be
These 2 are also available in the playback windowon encoder X and Y !

Re: Global rate master & Busking rate master

PostPosted: Mon May 23, 2011 4:31 am
by muvment
It looks like I have the Global Rate & Playback rate on the X & Y encoders. Do I need to change a setting to get Busking onto one of the encoders?

It would still be great to have both of them on faders, if possible.

thanks

Re: Global rate master & Busking rate master

PostPosted: Mon May 23, 2011 8:16 am
by ChamSys.be
You just have to unlock the encoders by pushing the soft button next to it.

Re: Global rate master & Busking rate master

PostPosted: Wed May 25, 2011 7:17 pm
by muvment
It was pretty clear to unlock the encoders. But there is no busking rate master on the encoder (however, I can apply it to the fader). The problem being, if I have the busking rate on the crossfade master, I would have to click the playback page every time I wanted to adjust the Global rate, which is a bit cumbersome.

Re: Global rate master & Busking rate master

PostPosted: Fri Jun 17, 2011 2:56 pm
by Element
Is there any way to get this added to the next release?

The global rate master, when used by the crossfader, has a huge range, and is easily accessible during a show. The soft button/fader control is only 0-100 and is hard to adjust in the middle of a show.

Is there any way to allow the option of assigning the busking rate master to the Submaster slider on the Maxi Wing, or possibly playback #10?

Having tactile access to both of these rates during the run of our type of shows (festivals and such) would be invaluable.

Re: Global rate master & Busking rate master

PostPosted: Fri Jun 17, 2011 3:25 pm
by ChamSys.be
New feature requests, you best report on the official Bug Tracker:
http://download.magicq.co.uk

Re: Global rate master & Busking rate master

PostPosted: Sat Jun 18, 2011 4:07 am
by Element
Already done it there. No response. I also emailed Esteban here in the USA.

Hopefully we'll see that option someday soon. It would really help busk a show!